Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Bleed the Front Brake Fluid of the Ducati 1198

Model: Ducati 1198
Part: Brake fluid

Video tutorial

This guide provides instructions for bleeding and topping up the brake fluid of the Ducati 1198 motorcycle. First, place your bike on a stand and connect the bleed hose to the brake fluid release valve found on the caliper; then, loosen the screw to bleed the brakes, as shown in the video.

Perform the same operation on the other caliper and then top up with new brake fluid, pouring the correct amount until reaching the maximum level mark indicated on the reservoir!


Updated on 19 August 2026 by ScegliAuto


Related tutorials

How to Replace the Coolant in the Ducati 1198
How to Replace the Coolant in the Ducati 1198
1198 Today's guide shows you how to drain and subsequently top up the coolant in the Ducati 1198 motorcycle. First, place the bike on a stand and remove t…
How to Change the Engine Oil on a Ducati 1198?
1198 In this tutorial, see how to change the engine oil on a Ducati 1198, a very simple and quick operation to perform every 12 months. First, ensure that…
Removing and Installing the Rear Wheel on Ducati 848-998-1098-1198
Removing and Installing the Rear Wheel on Ducati 848-998-1098-1198
1198 In this video tutorial, you will learn how to remove and install the rear wheel on various Ducati models, including the 848-998-1098-1198, in simple …

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos