|
Do it yourself
| |||
| ||||
Model: Ducati 1198
Today's guide shows you how to drain and subsequently top up the coolant in the Ducati 1198 motorcycle. First, place the bike on a stand and remove the drain screw located on the water pump casing, allowing the fluid to drain into a container. Next, replace the screw gasket and unscrew the filler cap to top up with the new antifreeze; pour the appropriate fluid into the radiator and to the correct level, filling up to the mark, following the video tutorial to the end!
Updated on 3 September 2026 by ScegliAuto
Video tutorial
Related tutorials
1198
In this tutorial, see how to change the engine oil on a Ducati 1198, a very simple and quick operation to perform every 12 months. First, ensure that…
1198
Regularly changing the engine oil and oil filter is essential for the proper functioning of the engine. Here’s how to perform the service on a Ducati…
1198
In this video tutorial, you will learn how to remove and install the rear wheel on various Ducati models, including the 848-998-1098-1198, in simple …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
