Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Ducati Panigale?

Model: Ducati Panigale V4s
Part: Checks and maintenance

This video is currently unavailable

The procedure for changing the engine oil on the Ducati Panigale V4 involves loosening the screws that secure the side protection plates at the bottom of the bike: by removing these screws, you will be able to detach the panels to access the underlying components.

On the left side, you will find the oil filter, which needs to be removed and replaced; at the bottom, there will be the drain plug, which must be unscrewed to collect all the oil in a container.

Finally, you can top up the oil by inserting it through the breather on the left side of the vehicle.


Updated on 27 August 2026 by ScegliAuto


Related tutorials

How do you replace the motor oil of the Ducati Panigale V4S?
How do you replace the motor oil of the Ducati Panigale V4S?
Panigale V4s The oil change of the Ducati Panigale V4S can be carried out by loosening the drain plug located in the central lower part of the vehicle: once this …
Engine Oil and Oil Filter Replacement for the Ducati Panigale V4s
Engine Oil and Oil Filter Replacement for the Ducati Panigale V4s
Panigale V4s The procedure for replacing the engine oil and oil filter is straightforward and does not require special tools; follow these steps to service the Du…
How to change the engine oil on the Ducati Panigale V4S
How to change the engine oil on the Ducati Panigale V4S
Panigale V4s To change the engine oil on the Ducati Panigale V4S, loosen the drain plug located at the bottom left of the bike's oil sump: once the plug is remove…

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos