Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on the Ducati Panigale V2?

Model: Ducati Panigale V2
Part: Clock

Video tutorial

To adjust the clock on the Ducati Panigale V2, turn on the instrument panel by inserting the key into the ignition switch. Once the panel is on, repeatedly press the grey button located on the left side of the handlebars.

Keep pressing until the hours start to flash; at this point, you can change them by repeatedly pressing the up arrow button, then move on to adjust the minutes. These can also be changed using the up arrow, confirming the input with the grey button.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

Replacing the Battery on a Ducati Panigale V2
Panigale V2 Here are the instructions for removing and replacing the battery on a Ducati Panigale V2 motorcycle, in simple and quick steps. First, place the moto…
How to Replace the Rearview Mirror of the Ducati Panigale V2
How to Replace the Rearview Mirror of the Ducati Panigale V2
Panigale V2 To replace the rearview mirror of the Ducati Panigale V2, you need to loosen the screws located just below the windscreen, on the inside above the ha…
How to replace the exhaust on a Ducati Panigale V2
How to replace the exhaust on a Ducati Panigale V2
Panigale V2 To replace the exhaust fitted on the Ducati Panigale V2, you will need to loosen the screws that secure the exhaust terminal to its housing, located …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Change the Engine Oil of a Ducati Hypermotard?

To change the engine oil of a Ducati Hypermotard, follow these simple but important steps. First, position the bike on a central or side stand to ensure stability. Make sure the engine is warm, not hot, to facilitate the flow of oil. Locate the oil drain plug, usually found on the underside of the engine. Place a suitable container under the drain plug to collect the used oil. Unscrew the drain plug and allow the used oil to drain completely into the container. Ensure you remove all the old oil before proceeding. Once all the oil has drained, reinstall and tighten the drain plug securely. Next, fill the engine with new engine oil of the specification recommended by the manufacturer. Use a funnel to avoid oil spills. Finally, check the oil level with the dipstick and add oil if necessary to bring it to the correct level. Make sure to dispose of the used oil properly at an authorised recycling centre.

Watch the video!


by ScegliAuto

More videos