Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the air filter of the Royal Enfield Bullet 500, you need to loosen the screws that secure the triangular panel of the motorcycle located on the right side near the seat: once this panel has been removed, you can proceed to remove the underlying air filter which can now be replaced with a new spare part. After the replacement, you can reinsert the covering panel on the right side of the motorcycle: this way you can check that everything works correctly even after the replacement.

Posted on 18 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil and Oil Filter Replacement on a Royal Enfield Bullet 500
Engine Oil and Oil Filter Replacement on a Royal Enfield Bullet 500
Bullet 500 Regular maintenance servicing must be carried out, following the instructions in the owner's manual; let's see how to do it on a Royal Enfield Bullet…
How to Replace the Engine Oil and Oil Filter of the Royal Enfield Bullet 500
How to Replace the Engine Oil and Oil Filter of the Royal Enfield Bullet 500
Bullet 500 The process of replacing the engine oil and oil filter should be done regularly to ensure the engine operates correctly; let's see how to service the…
How to change the engine oil and oil filter on the Royal Enfield Bullet 500
How to change the engine oil and oil filter on the Royal Enfield Bullet 500
Bullet 500 In this guide, discover the necessary steps to carry out the routine maintenance service by changing the engine oil and oil filter on the Royal Enfie…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos