Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide, discover the necessary steps to carry out the routine maintenance service by changing the engine oil and oil filter on the Royal Enfield Bullet 500. First, place the motorcycle on the centre stand and begin to unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one, as shown in the video. Finally, unscrew the filler cap and top up!

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Oil Filter of the Royal Enfield Bullet 500
How to Replace the Engine Oil and Oil Filter of the Royal Enfield Bullet 500
Bullet 500 The process of replacing the engine oil and oil filter should be done regularly to ensure the engine operates correctly; let's see how to service the…
How to Service a Royal Enfield Bullet 350-500
How to Service a Royal Enfield Bullet 350-500
Bullet 500 In this video, you will learn how to perform the routine maintenance service on a Royal Enfield Bullet 350 and 500, following the instructions below.…
How to replace the engine oil in the Royal Enfield Bullet 500?
How to replace the engine oil in the Royal Enfield Bullet 500?
Bullet 500 In this tutorial, we can see how to replace the engine oil in the Royal Enfield Bullet 500, an extremely simple and fast operation. First of all, mak…

How to Replace the Drive Belt of the Piaggio Vespa 50 ET2

Today, we will discover the instructions that will allow us to dismantle and replace the drive belt of the Piaggio Vespa 50 ET2. First, place the scooter on the stand and start unscrewing all the fixing screws found on the side of the transmission cover to remove it; then unscrew the screw of the fan and the variator, subsequently removing the drive belt, as shown in the video. At this point, install the new toothed belt, as well as the original one, correctly refitting the fan and finally the side cover of the transmission.

Watch the video!


by ScegliAuto

More videos