Do it yourself
Frequently asked questions about cars and motorcycles
To replace the front brake pads of the Royal Enfield Interceptor 650, you will need to loosen the screws that secure the brake caliper to the corresponding disc: once the screws have been unscrewed, it will be possible to completely detach the caliper from the disc so that the pin that holds the pads can be removed. At this point, the pads themselves can also be extracted in order to position the new ones: these should be secured by the previously removed pin. You can now reinsert the caliper onto the disc and secure it to check that everything is functioning.

Posted on 20 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Interceptor 650 To replace the front brake pads on the Royal Enfield Interceptor 650, loosen the bolts securing the brake caliper to the corresponding disc. Once the…
Interceptor 650 To replace the front brake pads on a Royal Enfield Interceptor 650, loosen the screws that secure the brake caliper to the corresponding front disc. …
Interceptor 650 In order to replace the brake pads of the Royal Enfield Interceptor 650, you need to loosen the screws that secure the brake calipers to the correspo…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos