Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Enfield Bullet 500
Part: Tires

In today's tutorial video, you will see the main steps to remove and replace the rear wheel and tyre of the Royal Enfield Bullet 500, as well as the Classic 500. First, place the motorcycle on the centre stand and start by unscrewing the central bolt of the rear wheel; then remove the wheel spindle and disconnect the rear brake cable, as shown in the video. At this point, disconnect the chain and deflate the tyre; use levers to remove the tyre from the rim, replacing it with the new one, following the video to the end!

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Main Fuse on a Royal Enfield Bullet 500
How to Replace the Main Fuse on a Royal Enfield Bullet 500
Bullet 500 This guide outlines the procedure to remove and replace the main fuse of the electrical system on a Royal Enfield Bullet 500 motorcycle. First, place…
How to Replace the Battery on a Royal Enfield Bullet 350 - 500
How to Replace the Battery on a Royal Enfield Bullet 350 - 500
Bullet 500 In today's video, you will learn how to remove and replace the battery on the Royal Enfield Bullet 500, as well as the 350, by following these simple…
How to Replace the Rear Wheel on the Royal Enfield Bullet 500
How to Replace the Rear Wheel on the Royal Enfield Bullet 500
Bullet 500 To replace the rear wheel on the Royal Enfield Bullet 500, loosen the nut securing the axle at the centre of the wheel. To loosen this nut, hold the …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos