Do it yourself
Frequently asked questions about cars and motorcycles
In today's video, you will learn how to remove and replace the battery on the Royal Enfield Bullet 500, as well as the 350, by following these simple steps. First, place the motorcycle on its centre stand and start by removing the metal cover of the battery, which is located on the left side of the bike; then disconnect both battery terminals (positive and negative) by unscrewing the nuts with a 10 mm spanner. At this point, remove and replace the battery with a new one of the correct type and with the same amperage; then refit it onto the battery holder!

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Bullet 500 .. service on a Royal Enfield Bullet 350 and 500, following the instructions below. First, position the motorcycle on the centre stand and remove.. …
Bullet 500 .. the air filter of the Royal Enfield Bullet 500, you need to loosen the screws that secure the triangular panel of the motorcycle located on the.. …
Bullet 500 .. rear wheel and tyre of the Royal Enfield Bullet 500, as well as the Classic 500. First, place the motorcycle on the centre stand and start by unscrewing.. …

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos