Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide outlines the procedure to remove and replace the main fuse of the electrical system on a Royal Enfield Bullet 500 motorcycle. First, place your motorcycle on the centre stand and start by removing the connector located near the battery box. Then, open the plastic cover to access the fuse, as shown in the video. At this point, remove the old fuse and replace it with the new one (find the original spare fuse); connect the new fuse and check the operation of the electrical system!

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Royal Enfield Bullet 500?
How to replace the engine oil in the Royal Enfield Bullet 500?
Bullet 500 In this tutorial, we can see how to replace the engine oil in the Royal Enfield Bullet 500, an extremely simple and fast operation. First of all, mak…
How to Replace the Battery on a Royal Enfield Bullet 350 - 500
How to Replace the Battery on a Royal Enfield Bullet 350 - 500
Bullet 500 In today's video, you will learn how to remove and replace the battery on the Royal Enfield Bullet 500, as well as the 350, by following these simple…
How to Replace the Rear Tyre on a Royal Enfield Bullet 500
How to Replace the Rear Tyre on a Royal Enfield Bullet 500
Bullet 500 In today's tutorial video, you will see the main steps to remove and replace the rear wheel and tyre of the Royal Enfield Bullet 500, as well as the …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos