Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Regular maintenance servicing must be carried out, following the instructions in the owner's manual; let's see how to do it on a Royal Enfield Bullet 500. First, place your motorcycle on the stand and start unscrewing the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; then unscrew the screws of the oil filter cover, removing and replacing the cartridge with the new one, as shown in the video. Finally, remove the dipstick to top up with new engine oil!

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Oil Filter of the Royal Enfield Bullet 500
How to Replace the Engine Oil and Oil Filter of the Royal Enfield Bullet 500
Bullet 500 The process of replacing the engine oil and oil filter should be done regularly to ensure the engine operates correctly; let's see how to service the…
How to change the engine oil and oil filter on the Royal Enfield Bullet 500
How to change the engine oil and oil filter on the Royal Enfield Bullet 500
Bullet 500 In this guide, discover the necessary steps to carry out the routine maintenance service by changing the engine oil and oil filter on the Royal Enfie…
How to Service a Royal Enfield Bullet 350-500
How to Service a Royal Enfield Bullet 350-500
Bullet 500 In this video, you will learn how to perform the routine maintenance service on a Royal Enfield Bullet 350 and 500, following the instructions below.…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos