Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, we will see, in this video tutorial, how to remove and replace the fuel cap on the Royal Enfield Interceptor by following these simple and quick steps. First, place your bike on the centre stand and start by lifting the metal tab of the tank cap; then insert and turn the key to open and remove the fuel cap, allowing you to refuel or replace the cap (and the lock), as shown in the video. At this point, close the fuel cap by turning the key!

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Tank on the Royal Enfield Interceptor 650?
How to Replace the Fuel Tank on the Royal Enfield Interceptor 650?
Interceptor 650 To replace the fuel tank on the Royal Enfield Interceptor 650, you need to loosen the screws that secure the seat to its housing, completely removing…
How to Replace the Battery in the Royal Enfield Interceptor 650?
How to Replace the Battery in the Royal Enfield Interceptor 650?
Interceptor 650 You can replace the battery in the Royal Enfield Interceptor 650 by loosening the screws that secure the side cover panel, located just under the fue…
How to replace the battery in the Royal Enfield Interceptor 650?
How to replace the battery in the Royal Enfield Interceptor 650?
Interceptor 650 In this tutorial we can see how to replace the battery in the Royal Enfield Interceptor 650, an extremely simple and quick operation. First of all, m…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos