Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The ABS system is a control circuit that prevents the wheels from locking during braking, which is very useful for everyday use. However, when off-roading, it can be more beneficial to disable it and allow the rider to manage braking sensitivity. To disable the ABS system on the Royal Enfield Himalayan, with the engine off, press and hold the "Abs" button located at the bottom right of the speedometer. Turn on the ignition, wait exactly five seconds, release the button, and the orange light that was previously steady will now flash, confirming the system has been disabled.

Updated on 16 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you replace the levers of the Royal Enfield Himalayan?
How do you replace the levers of the Royal Enfield Himalayan?
Himalayan In order to replace the levers of the Royal Enfield Himalayan, you will need to loosen the screws that secure them to their housings on the sides of …
How do you replace the exhaust pipe of the Royal Enfield Himalayan?
How do you replace the exhaust pipe of the Royal Enfield Himalayan?
Himalayan In order to replace the exhaust of the Royal Enfield Himalayan, you need to loosen the screws that secure the exhaust terminal to its housing, locate…
How to Replace the Front Headlight on the Royal Enfield Himalayan?
How to Replace the Front Headlight on the Royal Enfield Himalayan?
Himalayan In this tutorial, we will see how to replace the front headlight on the Royal Enfield Himalayan, a very simple and quick operation. First, ensure tha…

How to replace the motor oil in the KTM Duke 250?

In this tutorial we can see how to replace the engine oil in the KTM Duke 250, an extremely simple and quick operation. First of all, make sure that the engine is sufficiently cold, then place a container underneath it and open the cap of the fill hole. Next, locate the drain hole bolt, unscrew it using a socket wrench and remove the secondary filter, which should be cleaned and reinserted. At this point, open the main filter housing, insert the replacement, reassemble everything and pour the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos