Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Turn Signal Bulb on a Fiat Punto Evo

Model: Fiat Punto Evo India MK 1 - Years: 2014, 2015, 2016, 2017, 2018
Part: Side marker bulb

Video tutorial

Replacing the left side turn signal bulb on a Fiat Punto Evo is a simple and quick task. To replace the bulb, remove the wheel well cover using a Phillips screwdriver.

Disconnect the connector and then remove the bulb. Insert the new bulb, reconnect the connector, reattach the wheel well cover, and test the bulb's operation.

If necessary, proceed to replace the right front turn signal bulb. If the issue persists, check the fuse related to the bulb.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

How to Remove and Clean the Intercooler on the Fiat Punto Evo India
How to Remove and Clean the Intercooler on the Fiat Punto Evo India
Fiat Punto Evo India (2014-2018 / MK 1) This brief and simple guide shows you how to remove and clean (or replace) the intercooler on the Fiat Punto Evo India, following the instructions be…
How to Replace the Front Shock Absorber on a Fiat Punto Evo India?
How to Replace the Front Shock Absorber on a Fiat Punto Evo India?
Fiat Punto Evo India (2014-2018 / MK 1) To replace the front shock absorber on a Fiat Punto Evo India, lift the car with a jack or lift so that the wheel corresponding to the shock absorber…
How to Install an AUX-IN Jack on a Fiat Punto Evo India
How to Install an AUX-IN Jack on a Fiat Punto Evo India
Fiat Punto Evo India (2014-2018 / MK 1) To install an AUX-IN jack in your Fiat Punto Evo India, first remove the radio from its housing. You can do this with special clips that fit into the…

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos