Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Armrest on Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018

Below are the instructions that will allow you to remove and replace the armrest on the Fiat Grande Punto in simple steps. First, get in the vehicle and open the armrest storage compartment to access the fixing screws; unscrew the screws located inside and remove the cover situated behind the armrest, unscrewing the screws at the bottom as shown in the video. At this point, remove the armrest from the centre console, carry out the repair or replacement; secure it properly and check its correct operation.

Posted on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Handbrake on a Fiat Grande Punto
How to Adjust the Handbrake on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This video shows how to adjust the handbrake on a Fiat Grande Punto. Using a screwdriver, remove the cover located under the armrest, disconnect the …
Guide to Removing the Starter Motor from the Fiat Grande Punto
Guide to Removing the Starter Motor from the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This guide provides instructions for removing and replacing the starter motor on the Fiat Grande Punto and Punto Evo. First, open the bonnet and loca…
Guide to Removing the Clutch from the Fiat Grande Punto 1.2
Guide to Removing the Clutch from the Fiat Grande Punto 1.2
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This brief guide outlines the main steps to remove and replace the clutch of the Fiat Grande Punto 1.2, as well as the Punto Evo. First, open the bon…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos