Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on a Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Door trim panel

See other generations:
Video tutorial

Use a small flat screwdriver to remove the plastic cover near the opening handle. Unscrew the bolt revealed at this point.

Similarly, unscrew the two screws located beneath the armrest/handle in the centre of the door. At this point, unscrew the screws underneath the panel as clearly shown in the video.

Done! Now you can carefully (but slowly) pull the panel away from the door and disconnect the connectors and lock cable. If you're interested, the rest of the video shows how to remove the window motor.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

Removing the Speaker from a Fiat Grande Punto
Removing the Speaker from a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Want to replace the speakers in your Grande Punto? Let's go through the disassembly and assembly process. To replace the car speaker, you need to rem…
Replacement of the rear window motor on a Fiat Punto
Replacement of the rear window motor on a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Start by removing the door panel with your hands. This will give you access to the inside of the door. Remove the access cover to the door. Disconnec…
Remove the Speaker from the Door Panel on a Fiat Grande Punto
Remove the Speaker from the Door Panel on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Learn how to remove the speaker located in the door panel of a Fiat Grande Punto. Before starting disassembly, disconnect the battery terminals in th…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos