Do it yourself
Frequently asked questions about cars and motorcycles

Oil Top-Up on Fiat Punto 2

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Engine oil

See other generations:
Video tutorial

Turn off the car, remove the key, and open the bonnet using the support rod. Remove the oil level dipstick, which is indicated by the yellow cap and located near the windscreen. Wipe it with absorbent paper, reinsert it, and pull it out again.

The tip of the dipstick indicates the oil level in the engine: an optimal amount should coat half of the measuring area. If it is below this, top up through the yellow cap, being careful not to overfill: if the oil exceeds the marked area on the dipstick, it risks damaging the engine.

It is recommended to use 5W-30 oil for this model.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today, you will learn how to change the engine oil and oil filter on the Fiat Punto Evo 1.3 MultiJet, as well as on the Fiat Grande Punto. First, ope…
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Follow these steps to carry out the routine maintenance service by replacing the engine oil and oil filter of the Fiat Grande Punto 1.3 Multijet, as …
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide outlines the procedure for replacing the engine oil and oil filter while performing the regular maintenance service for the Fiat Punto Evo…

    Frequently Asked Questions

    • Punto 2005-2018 - How many liters of engine oil can a 90 HP Fiat Grande Punto 1.3 MultiJet hold? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos