Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling Headlining on Fiat Ducato

Model: Fiat Ducato X290 - Years 2014-2026

This video briefly shows how to dismantle the headlining in the cabin of a Fiat Ducato. To remove the headlining, you must first take off the interior light fixture, using a plastic wedge or flat screwdriver (be careful not to scratch). Use the same method (levering with a wedge) to extract the rear plastic of the headlining, then remove the handles above the windows by unscrewing their fixing screws. The sun visors must also be removed before the headlining, unscrewing their fixing bolts as well. This is not a complex operation but requires some time.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Thermostat from a Fiat Ducato
How to Remove the Thermostat from a Fiat Ducato
Fiat Ducato (2006-2014 / X250) Before you begin, open the bonnet of your Fiat Ducato. The thermostat is located near the bottom side of the cylinder head. Start by loosening and re…
How to Repair the Sliding Door of a Fiat Ducato?
How to Repair the Sliding Door of a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) To repair the sliding door of the Fiat Ducato, first remove the inner door panel: this should simply be pried off using a screwdriver. Once the panel…
How to replace the air filter of the Fiat Ducato
How to replace the air filter of the Fiat Ducato
Fiat Ducato (2014-2026 / X290) If you need to replace the engine air filter of your Fiat Ducato on your own and do not know how to do it, do not worry because you just need to foll…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos