Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Multipla
  6. : How to remove the Fiat Multipla spare wheel

Fiat Multipla - Video tutorial

Model: Fiat Multipla MK 1 - Years 1998-2010
Part: Wheel
Operation: How to remove the Fiat Multipla spare wheel

Removing the spare wheel is almost the same procedure on all cars, and not at all complicated! In the video we have a Fiat Multipla as an example. After removing any punctured wheel, open the trunk, remove everything and locate the nut that holds the wheel cable attached to the car. Unscrew the nut to loosen this cable. You will notice that the wheel is slowly going down. Now remove the wheel hook and leave it to one side. Nothing easier! At this point you can mount the wheel. Tighten the nut for the spare wheel cable so that the hook does not crawl on the ground when you drive.


Posted on 24 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Multipla 1998-2010 - How much does the Fiat Multipla spare wheel winch cost? Read Answer

Where are the fuses of the Volvo FH located?

All the fuses of the Volvo FH are located inside the fuse box located in the vehicle cabin: in order to access the box it will be necessary to unhook the internal fixing clips that block the panel in the upper part of the dashboard, along its entire length. extension. Once this panel has been removed, it will be possible to access the fuses and replace them if necessary: here it will be possible to identify the fuses that take care of the operation of the windshield wipers, the cigarette lighter, the headlights, etc. In the vehicle manual each fuse is indicated with its amperage.

Watch the video!


by ScegliAuto

More videos