Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Wheel Trims on Fiat Punto 2

Model: Fiat Punto MK 2, 188 - Years 1999-2011

In this video, you will see how to remove and replace the wheel trims or "caps" on a Fiat Punto second series, as well as on most vehicles without alloy wheels. To remove them, you need to take off the wheel; lift the vehicle with a jack and unscrew the four wheel bolts, as shown in the video. Now remove the wheel trim; the video shows repainting it instead of replacing it with a new one. Finally, reassemble everything by following the reverse procedure of disassembly!

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the fog light bulb of the Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Let's see how to proceed in case we need to replace the fog light bulb of the Fiat Punto. Let's position ourselves in front of the headlight that con…
How to Remove the Front Seat of a Fiat Punto
How to Remove the Front Seat of a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you start, open the front door of your Fiat Punto. Begin by unscrewing and removing the Torx screws that secure the seat rails to the car. Nex…
How to Replace the Auxiliary Belt on a Fiat Punto
How to Replace the Auxiliary Belt on a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before starting, exit the cabin of your Fiat Punto and lift the front end using a ramp or jack. Begin by loosening the tensioner that holds the auxil…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos