Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fog Light Bulb on the Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Headlight bulb

See other generations:
This video is currently unavailable

Follow these steps to replace the fog light bulb on the Fiat Punto. Position yourself in front of the light containing the bulb to be replaced, then use a Torx spanner to remove the three screws securing the unit.

Pull the light out of its housing and rotate the rear cover to remove it. Disconnect the electrical connector and release the metal clip holding the bulb so you can remove it and replace it with a new one. Be careful not to touch the new bulb with bare fingers when inserting it into its socket.

Refit the clip, reconnect the connector, replace the cover, and secure the light back in its housing with the screws.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

How to Replace the Fog Light Bulb on a Fiat Punto
How to Replace the Fog Light Bulb on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) To replace the front fog light bulb, first lift the car using a jack and then remove the wheel corresponding to the bulb you want to replace. Once th…
How to Replace the Indicator Bulb on Fiat Punto
How to Replace the Indicator Bulb on Fiat Punto
Fiat Punto (1993-1999 / MK 1, 176) Here’s how to replace the indicator bulb on a Fiat Punto. Open the engine compartment and secure it, then disconnect the black plastic cap of the ind…
How to Replace the Front Headlamp Bulb of a Fiat Punto
How to Replace the Front Headlamp Bulb of a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, open the bonnet of your Fiat Punto. Begin by unfastening and removing the rear cover of the blown bulb. Once done, release the clip…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos