Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Battery on Fiat Cars

Model: Fiat Fiat Various
Part: Key

Press the designated button to extend the key into the usable position. This will give you access to the small latch that holds the side cover in place. Using a small flat screwdriver, rotate this latch to release the cover, which you can now remove. Along with it, the compartment for the 3 Volt CR2032 lithium battery will come out of the key housing. Replace it and proceed in reverse order for reassembly, inserting the cover back in place and securing the latch with the screwdriver. Check the key's proper functioning. As you can see, it's a very simple operation.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Fiat Grande Punto - Panda key remote control
How to replace the battery of the Fiat Grande Punto - Panda key remote control
Fiat Fiat Various These brief instructions will guide us through the process of disassembling and replacing the battery of the key remote on various Fiat models such a…
How to Replace the Key Battery of the Fiat Egea
How to Replace the Key Battery of the Fiat Egea
Fiat Fiat Various To replace the button battery inside your Fiat Egea key, simply follow these steps. The entire procedure takes just a few minutes to complete and you…
Removing the Key Fob Battery for Fiat
Removing the Key Fob Battery for Fiat
Fiat Fiat Various In this tutorial, you will learn how to remove the battery from the key fob for Fiat models. First, extract the key from the fob, then insert the key…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos