|
Do it yourself
| |||
| ||||
Replacement of Bulbs in the Interior Light
Model: Fiat Punto
MK 2, 188
- Years:
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Video tutorial
Detach the ceiling light by prying along the edges with a small flat screwdriver; disconnect the power plug and unclip the white plastic reflector by flipping it over; then extract the old bulbs and insert the new ones (there is no need to observe polarity). Close the reflector, reconnect the plug, and reattach the ceiling light to the headlining after checking the functionality of the bulbs. If you decide to replace the bulbs with LED ones, ensure the correct position of insertion in the bulb holder.
Updated on 8 February 2026 by ScegliAuto
Related tutorials
Fiat Punto
(2005-2018 /
Grandepunto , Punto EVO, MK 3, 199)
This brief and simple guide shows you how to remove and replace the number plate bulbs on the Fiat Grande Punto, as well as the Punto Evo. First, mov…
Fiat Punto
(1993-1999 /
176, MK 1)
In this video tutorial, you will learn how to remove the interior light and replace the bulbs in a Fiat Punto. To remove the interior light, first, u…
Fiat Punto
(2005-2018 /
Grandepunto , Punto EVO, MK 3, 199)
Replacing the bulbs in the rear light of your Fiat Grande Punto? Follow this guide to replace the damaged bulbs. Open the boot lid, and using a screw…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in |
Resetting the Service Light on the Mitsubishi Canter
When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |