Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Number Plate Lights on the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: License plate light

See other generations:
Video tutorial

This brief and simple guide shows you how to remove and replace the number plate bulbs on the Fiat Grande Punto, as well as the Punto Evo. First, move to the rear and start by removing the number plate light cover, prying at the sides with something thin.

Next, remove the bulb from the cover as shown in the video.

At this point, replace the bulb with a new one, then refit the entire cover. Follow the same procedure to replace the other number plate light!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to Change the Number Plate Lights on a Fiat Punto Evo
How to Change the Number Plate Lights on a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) If the display on your Fiat Punto Evo shows "Check number plate lights", one or both bulbs are burnt out. To replace them, you need to remove the num…
Replacing the Number Plate Lights on the Fiat Panda
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide will show you how to remove and replace the number plate lights on the Fiat Punto Evo, as well as the Grande Punto. First, move to the rea…
How to Replace the Number Plate Lights on a Fiat Grande Punto
How to Replace the Number Plate Lights on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, we see how to replace the number plate lights on a Fiat Grande Punto. In fact, the lights work, but the vehicle indicates they are fau…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos