Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the license plate lights of the Fiat Panda

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: License plate light

The instructions in this guide will show us how to disassemble and replace the license plate lights of the Fiat Punto Evo, as well as the Grande Punto. First of all, let's move to the rear of the car and start levering on the side of the plastic bulb holder of the license plate light, then disconnecting the electrical connector found on the back; then we replace the small bulb with the new one, replacing either (as in this case) the entire bulb holder and license plate light. We fix the new bulb holder on the bumper, finally checking the operation of the license plate lights!

Posted on 18 June 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change the Number Plate Lights on the Fiat Grande Punto
How to Change the Number Plate Lights on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This brief and simple guide shows you how to remove and replace the number plate bulbs on the Fiat Grande Punto, as well as the Punto Evo. First, mov…
Guide to Replacing the Number Plate Lights
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The video shows how to carry out this simple maintenance operation to replace the lights that illuminate the rear number plate or simply replace them…
How to Remove the Rear Seats of a Fiat Panda
How to Remove the Rear Seats of a Fiat Panda
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you can start, open the rear doors of your Fiat Panda. Begin by unscrewing and removing all the screws that secure the lower bench of the rear…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos