Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Knob on a Fiat Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018

If you intend to replace the gear knob on your car with a custom model, the following description provides the information and steps to follow for this operation. Once seated in the driver's seat, proceed to unscrew the gear knob and remove it. Next, take the new aftermarket gear knob and first screw in the threaded base. After that, screw the knob onto its base until it aligns with the dashboard. This will complete the job.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Gear Knob on the Fiat Grande Punto
How to Adjust the Gear Knob on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video, you will learn how to adjust the gear knob on the Fiat Grande Punto. After several years of use, the gear knob may become imprecise…
Removing the Gear Knob of a Fiat Grande Punto
Removing the Gear Knob of a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In today's video tutorial, you will see how to remove and replace the gear knob of a Fiat Grande Punto, as well as the Punto Evo. First, get inside t…
How to Replace the Gear Knob of the Fiat Punto
How to Replace the Gear Knob of the Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Start the process by unscrewing the knob at the top of the gear lever in your vehicle. After rotating the knob sufficiently around the lever, you can…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos