Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 207
    4. : How do you repair the key spring of the Peugeot 207?

Peugeot 207 - Video tutorial

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Key
Operation: How do you repair the key spring of the Peugeot 207?

The passing of time and the use of the snap opening of the car key, dozens of times a day, inevitably lead to the wear of the internal spring of the same key. As can be seen in this video, the replacement of the spring is a rather simple job and requires little time. After opening the container shell in half, first place the key, then the housing bushing of the spring, and finally the aforementioned spring inside the aforementioned bushing. The shell closes, rotating clockwise and perfectly fitting all the aforementioned elements, testing the snap opening of the key.


Posted on 26 March 2024 by ScegliAuto

    Frequently Asked Questions

    • 207 2006-2015 - Why is the key of the Peugeot 207 not working? Read Answer
    • 207 2006-2015 - Why is the key of the Peugeot 207 not working? Read Answer
    • 207 2006-2015 - How to change the battery on the key of the Peugeot 207 from 2007? Read Answer
    • 207 2006-2015 - Why does the message Electronic anti-theft fault appear in the Peugeot 207? Read Answer
    • 207 2006-2015 - What to do if you have a central locking problem on your Peugeot 307? Read Answer
    • 207 2006-2015 - What problems does the Peugeot 207 remote control have? Read Answer
    • 207 2006-2015 - What to do if the Peugeot 207 remote control no longer works? Read Answer
    • 207 2006-2015 - What to do when the Peugeot 207 key does not work? Read Answer
    • 207 2006-2015 - What to do to electronically open the trunk of the Peugeot 207? Read Answer
    • 207 2006-2015 - How to replace the remote control battery of the Peugeot 207? Read Answer
    • 207 2006-2015 - Why does the key not work on Peugeot 207? Read Answer

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos