Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you repair the convertible top of the Peugeot 207 CC?

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Convertible top

To ensure that the roof of the Peugeot 207 CC is repaired, it will be necessary to use a tool to lever off the coverings of the opening and closing pistons of the roof, which are located on the sides of the rear pillars of the car; it will be necessary to locate the cables present here and also the mechanisms that allow the movement of the roof in order to repair them at the points where they are damaged. Once the roof has been freed, it will be possible to reconnect all the connectors and verify that the operation is correct after the repairs.

Posted on 30 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp on a Peugeot 207
How to Replace the Front Headlamp on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) How do you remove the front headlamp from a Peugeot 207? To remove the front headlamp, you first need to take off the front bumper. After unscrewing …
Replacement of the diesel fuel filter of the Peugeot 207.
Replacement of the diesel fuel filter of the Peugeot 207.
Peugeot 207 (2006-2015 / MK 1) To replace the diesel filter of the Peugeot 207, we open the front hood, the filter is located to the left of the air filter. We start by removing th…
How to replace the front headlight bulb of the Peugeot 207
How to replace the front headlight bulb of the Peugeot 207
Peugeot 207 (2006-2015 / MK 1) To complete the replacement of the front headlight bulb of your Peugeot 207, just a few simple steps are needed, which we will discover below. First …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos