Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Cigarette Lighter in a Peugeot 207?

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Cigarette lighter

To repair the cigarette lighter in a Peugeot 207 if it is not functioning, simply replace the fuse that controls its operation. To access this fuse, open the glove compartment on the passenger side and detach the plastic panel on the left side. Once this panel is removed, you will have access to the fuses, and the cigarette lighter fuse can be pulled out as shown in the video. At this point, insert a new fuse with the same amperage, close the fuse box, and then check that the cigarette lighter is now working.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you repair the convertible top of the Peugeot 207 CC?
How do you repair the convertible top of the Peugeot 207 CC?
Peugeot 207 (2006-2015 / MK 1) To ensure that the roof of the Peugeot 207 CC is repaired, it will be necessary to use a tool to lever off the coverings of the opening and closing p…
How do you replace the alternator in the Peugeot 207?
How do you replace the alternator in the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) The alternator is an essential component for any car, not only for the Peugeot 207, because thanks to it the vehicle's power supply battery is charge…
How to Clean the EGR Valve of a Peugeot 207 1.6 hDi
How to Clean the EGR Valve of a Peugeot 207 1.6 hDi
Peugeot 207 (2006-2015 / MK 1) Before you can start, start the engine of your Peugeot 207 1.6 hDi, then open the bonnet. Begin by disconnecting one end of the hose connected to the…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos