Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to replace the gear knob on the Fiat Punto

Fiat Punto - Video tutorial

Model: Fiat Punto Punto EVO, Grandepunto , MK 3, 199 - Years 2005-2018
Part: Gear Shift Knob
Operation: How to replace the gear knob on the Fiat Punto

Obviously, start the operations by unscrewing the knob on top of the gear lever of your car, after having rotated the knob abundantly around the lever you can be able to extract it and you will have to pay close attention to the spring that is present around the shift rod and immediately under the knob. This spring is the spring that allows you to engage the reverse gear, so to screw your new knob back into the correct position so that the gears are correctly indicated you must screw the knob starting from the position in which you want the knob to be at the end of its travel.


Posted on 3 October 2023 by ScegliAuto



To adjust the gear knob of the Fiat Grande Punto.
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In today's video, we will see how to adjust the gear knob of the Fiat Grande Punto. It often happens, in fact, that after several years of use, the g
How to change the gear knob of a Fiat Punto.
Fiat Punto (1999-2011 / 188, MK 2) In today's video tutorial, we will see how to disassemble and replace the gear knob of the Fiat Punto, following the instructions below. First, we ge
Disassembly of the gear knob of the Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In today's video tutorial we will see how to remove and replace the gear knob on the Fiat Grande Punto, but also on the Punto Evo. First of all, let'

    Frequently Asked Questions

    • Punto 2005-2018 - How to replace the gear knob on the Fiat Punto? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos