Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Wrap the Exterior Mirror of a Fiat 500

Model: Fiat 500 312 - Years 2007-2022
Part: Side mirror

To wrap the top part of the exterior mirror of a Fiat 500, you will need a sheet of vinyl in your desired colour. Heat it up with a heat gun until it is pliable, then apply it while still warm to the mirror. This way, you can shape it, using the heat gun and a plastic spatula to help mould the vinyl onto the mirror. Then, use a craft knife to trim any excess, tucking it slightly into the gaps between the various pieces. This is special vinyl, which you can find on all major e-commerce platforms.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the external rearview mirror of the Fiat 500
How to replace the external rearview mirror of the Fiat 500
Fiat 500 (2007-2024 / 312) In the following guide dedicated to all of you who own the new Fiat 500, we will discover how to correctly replace the external rearview mirror. Firs…
How to Replace the External Rear-View Mirror on a Fiat 500?
How to Replace the External Rear-View Mirror on a Fiat 500?
Fiat 500 (2007-2021 / 312) Before starting, open the driver's door of your Fiat 500. Begin by unclipping and removing the cover of the external support arm of the mirror. Then,…
How to disassemble the external rearview mirror of the Fiat 500X
How to disassemble the external rearview mirror of the Fiat 500X
Fiat 500 (2014-2022 / 500 X) In a few simple steps, we will see the process that will allow us to disassemble and replace the external rearview mirror of the Fiat 500X. First, we…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos