Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Hood of the Fiat Avventura

Model: Fiat Avventura MK 1 - Years: 2014, 2015, 2016, 2017, 2018
Part: Body

Video tutorial

In this video tutorial, you will see the steps to open the hood of the Fiat Avventura, even in an emergency, in simple and quick steps. First, open the front door and start pulling the lever located at the bottom on the driver's side to release the hood latch; then move to the front and lower the tab found in the center, as shown in the video.

At this point, lift the hood and secure it with the side prop; finally, close the hood!


Updated on 22 June 2026 by ScegliAuto


Related tutorials

How to Open the Fuel Cap on the Fiat Avventura?
How to Open the Fuel Cap on the Fiat Avventura?
Fiat Avventura (2014-2018 / MK 1) To open the fuel cap on the Fiat Avventura, sit in the driver's seat to locate the lever at the base on the side. Once you find this lever, pull it u…
Where is the VIN located on the Fiat Avventura?
Where is the VIN located on the Fiat Avventura?
Fiat Avventura (2014-2018 / MK 1) The video shows the exact location of the VIN on the Fiat Avventura. You can read this identification code from inside the cabin by lifting the carpe…
How to Remove the Spare Tire on a Fiat Avventura?
How to Remove the Spare Tire on a Fiat Avventura?
Fiat Avventura (2014-2018 / MK 1) In this tutorial, you will see how to remove the spare tire from the rear hatch of a Fiat Avventura, a very simple operation necessary in case of a f…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos