Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Spare Tire on a Fiat Avventura?

Model: Fiat Avventura MK 1 - Years: 2014, 2015, 2016, 2017, 2018
Part: Wheel

Video tutorial

In this tutorial, you will see how to remove the spare tire from the rear hatch of a Fiat Avventura, a very simple operation necessary in case of a flat tire. First, open the cover by unlocking the appropriate hinge located at the bottom.

Then, open the hatch, lift the floor panel, and take the special socket wrench needed to unscrew the spare tire mounting bolts. Of course, you will need to attach the wrench that you will then use to mount the tire onto the hub. To reinstall the tire in the hatch, simply follow the reverse procedure.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Open the Rear Hatch of the Fiat Avventura
How to Open the Rear Hatch of the Fiat Avventura
Fiat Avventura (2014-2018 / MK 1) The vehicle comes with a spare tire accessory located at the rear and outside of the car, so to open the rear hatch, you need to: First, unlock the d…
Fiat Avventura: A Crossover Designed for the Indian Market
Fiat Avventura: A Crossover Designed for the Indian Market
Fiat Avventura (2014-2018 / MK 1) The Fiat Avventura crossover is based on the Grande Punto and was intended solely for the Indian market from the beginning. The vehicle is built at t…
Where is the VIN located on the Fiat Avventura?
Where is the VIN located on the Fiat Avventura?
Fiat Avventura (2014-2018 / MK 1) The video shows the exact location of the VIN on the Fiat Avventura. You can read this identification code from inside the cabin by lifting the carpe…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos