Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Rear Hatch of the Fiat Avventura

Model: Fiat Avventura MK 1 - Years: 2014, 2015, 2016, 2017, 2018
Part: Car door

Video tutorial

The vehicle comes with a spare tire accessory located at the rear and outside of the car, so to open the rear hatch, you need to: First, unlock the door openings with the remote, then unlock the lock on the handle of the compartment containing the spare tire and pull it towards you to fully open it. At this point, you can open the hatch by pulling the lever located on the lock at the bottom.

To close everything, first close the hatch and then close the spare tire compartment.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Remove the Spare Tire on a Fiat Avventura?
How to Remove the Spare Tire on a Fiat Avventura?
Fiat Avventura (2014-2018 / MK 1) In this tutorial, you will see how to remove the spare tire from the rear hatch of a Fiat Avventura, a very simple operation necessary in case of a f…
Fiat Avventura: A Crossover Designed for the Indian Market
Fiat Avventura: A Crossover Designed for the Indian Market
Fiat Avventura (2014-2018 / MK 1) The Fiat Avventura crossover is based on the Grande Punto and was intended solely for the Indian market from the beginning. The vehicle is built at t…
How to Open the Fuel Cap on the Fiat Avventura?
How to Open the Fuel Cap on the Fiat Avventura?
Fiat Avventura (2014-2018 / MK 1) To open the fuel cap on the Fiat Avventura, sit in the driver's seat to locate the lever at the base on the side. Once you find this lever, pull it u…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos