Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fiat Avventura: A Crossover Designed for the Indian Market

Model: Fiat Avventura MK 1 - Years: 2014, 2015, 2016, 2017, 2018

Video tutorial

The Fiat Avventura crossover is based on the Grande Punto and was intended solely for the Indian market from the beginning. The vehicle is built at the Chennai plant (formerly known as Madras).

Aesthetically, the vehicle features plastic reinforcements at the rear and a prominent external spare tire that is distinctly positioned away from the door, unlike other types of crossovers that use this same solution, where the tire remains fixed on the rear hatch.

The engine options include a 1.3 MTJ with 93 hp and a 1.4 gasoline engine with 140 hp.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Open the Fuel Cap on the Fiat Avventura?
How to Open the Fuel Cap on the Fiat Avventura?
Fiat Avventura (2014-2018 / MK 1) To open the fuel cap on the Fiat Avventura, sit in the driver's seat to locate the lever at the base on the side. Once you find this lever, pull it u…
How to Scan with Diagnostic Software on the Fiat Avventura
How to Scan with Diagnostic Software on the Fiat Avventura
Fiat Avventura (2014-2018 / MK 1) Discover in this brief and simple guide how to scan for errors and reset on the Fiat Avventura by following the instructions below. First, get in the…
Where is the VIN located on the Fiat Avventura?
Where is the VIN located on the Fiat Avventura?
Fiat Avventura (2014-2018 / MK 1) The video shows the exact location of the VIN on the Fiat Avventura. You can read this identification code from inside the cabin by lifting the carpe…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos