Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Headlight bulb

Open and lift the bonnet, now locate the headlamps to work on their rear. By removing the plastic cover at the back of each bulb, you will gain direct access to the individual bulbs. Rotate the bulb holder counterclockwise to extract the bulb, disconnect the connector, or you can directly remove the bulb and replace it with a new one, taking care not to touch the glass part with your fingers to avoid shortening the bulb's lifespan. Retrace your steps for reassembly.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
How to Replace the Front Light Bulb on a Fiat 500?
How to Replace the Front Light Bulb on a Fiat 500?
Fiat 500 (2007-2021 / ) To replace the front light bulb on a Fiat 500, access the inner cover of the wheel arch corresponding to the bulb that needs replacing. Here, you wil…
How to Replace the Front Headlamp Bulb on a Fiat 500?
How to Replace the Front Headlamp Bulb on a Fiat 500?
Fiat 500 (2007-2022 / ) To replace the front headlamp bulb on a Fiat 500, open the bonnet to access the screws securing the headlamp from the top. You may also need to detac…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos