Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulb on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Headlight bulb

Release and lift the bonnet, then locate the position of the headlights to work on their rear. By removing the plastic cover on the back of each bulb, you can access the individual bulbs directly. Rotate the bulb holder counterclockwise to extract the bulb. Disconnect the connector or remove the bulb directly and replace it with the new bulb, taking care not to touch the glass part with your fingers to avoid shortening the bulb's lifespan. Retrace your steps for reassembly.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the H7 Dipped Beam Bulb in a Fiat 500
How to Replace the H7 Dipped Beam Bulb in a Fiat 500
Fiat 500 (2007-2022 / ) In this video tutorial, you will see how to replace the H7 dipped beam bulb in a Fiat 500 by following some simple steps. Required materials: a pair …
Replacing the Dipped Beam Bulb (H7) in the Fiat 500
Replacing the Dipped Beam Bulb (H7) in the Fiat 500
Fiat 500 (2007-2021 / 312) To replace the dipped beam bulb in the Fiat 500, first secure the vehicle on a level surface or on a ramp. This step is necessary whenever performing…
Replacing the Front Headlight Bulb on a Fiat 500
Replacing the Front Headlight Bulb on a Fiat 500
Fiat 500 (2007-2021 / 312) In today's video, you will learn how to remove and replace the front headlight bulbs on a Fiat 500 by following these simple steps. First, open and l…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos