Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb of the Fiat Tipo?

Model: Fiat Tipo 358, 356, 357 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear light bulb of the Fiat Tipo, open the boot to access the components inside the luggage compartment. Here, you will locate the internal protection panel, which must be removed to access the underlying screw.

This screw can be fully unscrewed, allowing you to extract the light from its housing and disconnect the internal connector. The optical unit can then be opened, removing the internal bulb and replacing it with a new one. After the replacement, refit the light.


Updated on 8 October 2026 by ScegliAuto


Related tutorials

How to remove the rear light and bulbs of the Fiat Tipo
How to remove the rear light and bulbs of the Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) In this brief and simple guide, you will learn the steps to remove and replace the rear light and its bulbs on the Fiat Tipo. First, open the boot li…
How to Remove the Rear Headlamp Bulb from the Fiat Tipo 356-357
How to Remove the Rear Headlamp Bulb from the Fiat Tipo 356-357
Fiat Tipo (2016-2026 / 358, 356, 357) This guide explains how to remove and replace the bulbs of the rear headlamp on the second series Fiat Tipo, versions 356 and 357. First, open the bo…
How to Remove the Number Plate Light on a Fiat Tipo
How to Remove the Number Plate Light on a Fiat Tipo
Fiat Tipo (2016-2026 / 358, 356, 357) Learn how to remove the number plate light on a Fiat Tipo to replace the bulb. Use a screwdriver or plastic lever to remove the number plate light lo…

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos