Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. B Max
    4. : Tire pressure warning light

Ford B Max - Tire pressure warning light

Tire Pressure Warning Light Ford B Max (2012-2018 / mk 1)

Ford B Max (2012-2018 / MK 1)
How to reset the tyre pressure warning light on the Ford B-Max?
To reset the tyre pressure warning light on the Ford B-Max, inflate all tyres to the recommended pressure value, which is stated on the sticker affixed to the …Read all…
Posted on 22 July 2026 by ScegliAuto
Ford B Max (2012-2018 / MK 1)
How to Deactivate the TPMS in the Ford B-Max
In this video, we will see how to reset the tyre pressure sensor in the Ford B-Max. This operation is necessary after inflating one or more tyres of the …Read all…
Posted on 6 August 2026 by ScegliAuto
Ford B Max (2012-2018 / MK 1)
How to Manually Reset the TPMS Light on the Ford B Max
To manually reset the TPMS light on your Ford B Max, it only takes a few seconds. In fact, thanks to the procedure described in this mini guide, you can do it …Read all…
Posted on 8 July 2026 by ScegliAuto
Airbag (1) Car stereo (1) Roof rack bars (2) Battery (1) Key (3) Timing belt (6) V-belt (1) Onboard computer (3) Checks and maintenance (2) Tail light (3) Air filter (1) Cabin air filter (2) Diesel fuel filter (1) Parking brake (1) Tail light bulb (3) Interior dome light bulb (1) Engine oil (1) Clock (2) Door trim panel (1) Front bumper (1) Car door (1) Heater control valve (1) Fuse box (2) Seat (1) Side mirror (1) Warning light – error code (1) (6) Tire pressure warning light (3) Service warning light (4)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos