Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. B Max
    4. : Tail light

Ford B Max - Tail light

Tail Light Ford B Max (2012-2018 / mk 1)

Ford B Max (2012-2018 / MK 1)
How to Remove the Brake Light on Ford B Max
If you need to change the rear brake light on a Ford B Max, first know that you will need to remove the entire light assembly. First, as shown in the video, …Read all…
Posted on 17 May 2026 by ScegliAuto
Ford B Max (2012-2018 / MK 1)
How to Remove the Rear Light on B Max
Remove the rear light on the B Max to replace it or change blown bulbs. Here’s how to disassemble it. Open the boot lid, then remove the plastic cap located …Read all…
Posted on 26 April 2026 by ScegliAuto
Ford B Max (2012-2018 / MK 1)
How to Remove the Rear Light of a Ford B Max
Let's see how to remove the rear light of a Ford B Max. Open the boot and secure it; locate the securing screws of the rear light (next to the light); open the …Read all…
Posted on 28 March 2026 by ScegliAuto
Airbag (1) Car stereo (1) Roof rack bars (2) Battery (1) Key (3) Timing belt (6) V-belt (1) Onboard computer (3) Checks and maintenance (2) Tail light (3) Air filter (1) Cabin air filter (2) Diesel fuel filter (1) Parking brake (1) Tail light bulb (3) Interior dome light bulb (1) Engine oil (1) Clock (2) Door trim panel (1) Front bumper (1) Car door (1) Heater control valve (1) Fuse box (2) Seat (1) Side mirror (1) Warning light – error code (1) (6) Tire pressure warning light (3) Service warning light (4)

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos