Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Ford B Max

Model: Ford B Max MK 1 - Years 2012-2018
Part: Tail light

Let's see how to remove the rear light of a Ford B Max. Open the boot and secure it; locate the securing screws of the rear light (next to the light); open the plastic inspection cap (located in the boot) and unscrew the plastic pins that secure the light (same size and voltage). Use a lever to detach the light from its housing and disconnect the power connectors. After replacing the damaged light with a new one, fit the new light into the car's body. Test the correct operation of the bulbs you have installed with the new light.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulbs of the Ford B-Max
How to replace the rear headlight bulbs of the Ford B-Max
Ford B Max (2012-2018 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Ford B-Max. First of all, we …
How to Remove the Rear Light on B Max
How to Remove the Rear Light on B Max
Ford B Max (2012-2018 / MK 1) Remove the rear light on the B Max to replace it or change blown bulbs. Here’s how to disassemble it. Open the boot lid, then remove the plastic cap …
How to Remove the Brake Light on Ford B Max
How to Remove the Brake Light on Ford B Max
Ford B Max (2012-2018 / MK 1) If you need to change the rear brake light on a Ford B Max, first know that you will need to remove the entire light assembly. First, as shown in the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos