Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on B Max

Model: Ford B Max MK 1 - Years 2012-2018
Part: Tail light

Remove the rear light on the B Max to replace it or change blown bulbs. Here’s how to disassemble it. Open the boot lid, then remove the plastic cap located on the side trim of the boot. Undo the fastening screw of the rear light, detach the light from the bodywork and disconnect the power connectors. Replace the damaged bulbs with new ones (same voltage) at hand. Refit the light, reconnect the electrical connectors, screw in the fastening screw, and reattach the inspection cap. Turn on the lights and check their operation.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of a Ford B Max
How to Remove the Rear Light of a Ford B Max
Ford B Max (2012-2018 / MK 1) Let's see how to remove the rear light of a Ford B Max. Open the boot and secure it; locate the securing screws of the rear light (next to the light)…
How to replace the rear headlight bulbs of the Ford B-Max
How to replace the rear headlight bulbs of the Ford B-Max
Ford B Max (2012-2018 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Ford B-Max. First of all, we …
Replacing Rear Headlight Bulbs on Ford B Max
Replacing Rear Headlight Bulbs on Ford B Max
Ford B Max (2012-2018 / MK 1) Open the boot and observe the side area inside it, locating a small flap present in the lining behind the headlights. Open the flap for the affected …

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos