Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Headlight Bulbs on Ford B Max

Model: Ford B Max MK 1 - Years 2012-2018
Part: Tail light bulb

Open the boot and observe the side area inside it, locating a small flap present in the lining behind the headlights. Open the flap for the affected rear headlight and remove the retaining screw. Disconnect the connectors and pull the headlight out of its housing. Now that it is free, place it on a workbench and unscrew the fixing screws of the housing where the bulbs are attached. Once done, simply unscrew the old bulb and screw in the new one you purchased. Reassemble everything in reverse order.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulbs of the Ford B-Max
How to replace the rear headlight bulbs of the Ford B-Max
Ford B Max (2012-2018 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Ford B-Max. First of all, we …
How to Remove the Rear Light of a Ford B Max
How to Remove the Rear Light of a Ford B Max
Ford B Max (2012-2018 / MK 1) Let's see how to remove the rear light of a Ford B Max. Open the boot and secure it; locate the securing screws of the rear light (next to the light)…
How to Replace the Interior Bulbs of the Ford B-Max
How to Replace the Interior Bulbs of the Ford B-Max
Ford B Max (2012-2018 / MK 1) In today's video, you will see how to replace the interior lights of the Ford B-Max. Obtain a flathead screwdriver and proceed to unclip the ceiling …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos