Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Brake Light on Ford B Max

Model: Ford B Max MK 1 - Years 2012-2018
Part: Tail light

If you need to change the rear brake light on a Ford B Max, first know that you will need to remove the entire light assembly. First, as shown in the video, force open the side felt door. Now you will see a butterfly screw that you need to undo. The light is now within reach. To remove it, disconnect the plug by pressing the button with a screwdriver. At this point, remove the four screws from the rear cover of the light. Now the bulbs are accessible; undo the one related to the brake light and fit the new one, being careful with the plastic tabs that determine the orientation of the light.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford B Max (2012-2018 / MK 1) Disabling the start and stop system temporarily on a Ford BMX vehicle is a simple and quick operation to perform whenever we feel the need. To perfor…
Ford B Max (2012-2018 / MK 1) Before you begin, open the front passenger door of your Ford B-Max. Start by removing the panel located at the bottom of the centre tunnel. Next, dis…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos