Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fan Resistor on a Ford B-Max

Model: Ford B Max MK 1 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Heater control valve

Video tutorial

Before you begin, open the front passenger door of your Ford B-Max. Start by removing the panel located at the bottom of the centre tunnel. Next, disconnect the electrical connector attached to the resistor.

Once done, unscrew the bolts that secure the resistor. This will free the resistor itself.

At this point, extract the resistor from its housing. When you have completed this step, you will have finished removing the resistor from your Ford B-Max.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How do you replace the car radio in a Ford B-Max?
How do you replace the car radio in a Ford B-Max?
Ford B Max (2012-2018 / MK 1) It will be possible to replace the car radio of the Ford B-Max by using a tool to pry off the trim panel surrounding the radio. Once the underlying r…
How to Replace the Timing Belt on a Ford B-Max
How to Replace the Timing Belt on a Ford B-Max
Ford B Max (2012-2018 / MK 1) To replace the timing belt on a Ford B-Max, lift the vehicle with a jack or ramp to remove the front right wheel and the corresponding wheel arch, al…
Fitting Roof Bars on Ford B-Max
Fitting Roof Bars on Ford B-Max
Ford B Max (2012-2018 / MK 1) Today, you will learn how to fit roof bars on a Ford B-Max by following these useful instructions. Various types of roof bars are available, differin…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos