Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Ford Explorer
    4. : Brake rotors

Ford Explorer - Brake rotors

Brake Rotors Ford Explorer (2011-2019 / mk 5, u 502)

Ford Explorer (2011-2019 / MK 5, U502)
How to Change the Brake Discs and Front Brake Pads on a Ford Explorer
To change the brake discs and pads on the Ford Explorer, follow these steps: start by removing the wheel, then unscrew the two rear bolts holding the brake …Read all…
Posted on 22 June 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Car stereo (5) Roof rack bars (1) Battery (8) Spark plugs (2) Body (4) Key (16) Trunk lock (1) V-belt (1) Onboard computer (1) Checks and maintenance (6) Dashboard (2) Brake rotors (1) Headlight (3) Tail light (2) Fog lights (1) Air filter (4) Cabin air filter (10) Oil filter (1) Accessory kit (1) Light bulb (4) Headlight bulb (5) Tail light bulb (3) Antifreeze coolant (1) Instrument panel light (1) Handle (4) Starter motor (2) Transmission fluid (1) Engine oil (2) Clock (4) Door trim panel (6) Front bumper (1) Rear bumper (2) Brake pads (1) Tires (1) Fuel pump (2) Car door (1) Power window switch (1) Wheel (2) Fuse box (22) Door lock (1) Oxygen sensor (1) Side mirror (8) Warning light – error code (7) (3) Service warning light (28) Manufacturer emblem (2) Fuel cap (2) Windshield wipers (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos