Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front headlight bulb in the 2016 Ford Kuga?

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Headlight bulb

Suddenly, while turning on the headlights, we notice that one of the bulbs in the front headlight assembly is not working, low beams, position, high beams, etc. It's not a big problem, fixing it is simple and can be done by yourself, you could avoid going to the workshop if you follow the video available here: We open the hood, remove the protective plastic cap at the back of the aforementioned headlight assembly, release the metal clip, remove the bulb holder and finally remove the bulb to be replaced. The job is completed by following the reverse procedure, putting everything back in place.

Posted on 22 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Ford Kuga?
How to Replace the Front Headlight Bulb of the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) To replace the front headlight bulb of the Ford Kuga, open the bonnet to access the components at the rear of the headlight. Here, you will find the …
How to Replace the Headlight Bulb of a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) To replace the headlight bulb of a Ford Kuga, detach the plastic cover located immediately under the corresponding headlight. Then, open the bonnet a…
How to replace the headlight bulb of the Ford Kuga
How to replace the headlight bulb of the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Replacing the right and left front headlight bulbs of the Ford Kuga is a simple and quick operation because thanks to the ample space of the front ho…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - How to replace the sidelight bulbs in Ford Kuga? Read answer

How to Reset the Tyre Pressure Warning Light on the Hyundai Tucson

Today, we will discover the instructions that will allow you to reset the tyre pressure warning light (TPMS) on the Hyundai Tucson; before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and start the ignition; next, navigate to the onboard computer settings using the controls on the steering wheel until you reach the tyre pressure monitoring section, as shown in the video. At this point, confirm and execute the reset of the TPMS warning light!

Watch the video!


by ScegliAuto

More videos