Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp of the Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

To replace the front headlamp assembly on the Ford Kuga, first secure the vehicle on a flat surface or a ramp for safety. Open the bonnet and, using a suitable spanner, remove the bolt at the top of the headlamp assembly that secures the retaining bracket.

Remove the plastic trim located directly beneath the headlamp. This gives access to the clip underneath the headlamp assembly, which, once released, allows you to remove the headlamp from its housing.

Remove the rubber cover from the electrical contacts, disconnect the connections, and you can then extract the old headlamp. For fitting the new headlamp, follow the same steps in reverse order.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Headlamp of the Ford Kuga
How to Remove the Front Headlamp of the Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) Today, you will learn how to remove the front headlamp of the Ford Kuga independently. To carry out this operation, open the bonnet and using a 30 mm…
How to Change the Headlight Bulb on a Ford Kuga
How to Change the Headlight Bulb on a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) Replacing damaged front headlight bulbs on a Ford Kuga? Here’s how to do it. Open the access panel, pull the bonnet release lever; lift the bonnet an…
Replacing the Front Headlamp Bulb on the Ford Kuga
Replacing the Front Headlamp Bulb on the Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) If the front headlamp bulb on the Ford Kuga burns out, it must be replaced as soon as possible for safety. Open the bonnet, stand in front of the hea…

How to Enter the Unlock Code for the Radio in the Nissan Micra?

In this tutorial, you will see how to enter the unlock code for the radio in the Nissan Micra, a very simple operation to perform in case of memory loss after replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. First, turn on the instrument panel, then repeatedly press the "1" button until you reach the first digit of the code. Follow the same logic to enter the remaining 3 digits using the "2", "3", and "4" buttons, and confirm the entry with the up arrow button.

Watch the video!


by ScegliAuto

More videos