Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the front headlight bulb of the Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Headlight bulb

If the front headlight bulb of the Ford Kuga burns out, for our safety it must be replaced as soon as possible. We open the hood of the engine compartment, stand in front of the headlight containing the bulb to be changed, unscrew the screw at the top, disconnect the connector, remove the body panel below the headlight, release the two levers below the headlight to remove it. Once the headlight is removed, we will have access to the back where we will remove the plastic cover to access the bulb. Using a torx20 screwdriver, unscrew the two screws holding the bulb and remove it, replace it with a new H7 bulb, secure the connector with the screws, put back the cover and reassemble the headlight by reversing the steps.

Posted on 12 September 2024 by ScegliAuto

Video tutorial

Related tutorials

Ford Kuga (2012-2019 / C520, MK 2) Replacing the right and left front headlight bulbs of the Ford Kuga is a simple and quick operation because thanks to the ample space of the front ho…
Ford Kuga (2020-2026 / MK 3) Replacing the front headlight bulbs of the Ford Kuga is a very simple operation to perform in a few steps. The first step is to open the front hood. …
Ford Kuga (2008-2012 / C394, MK 1) To replace the rear headlight bulb of the Ford Kuga, we need to open the vehicle's trunk and remove the side cover of the carpet, in this way we will…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - How to replace the sidelight bulbs in Ford Kuga? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos