Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Headlight Bulbs on a Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Headlight bulb

How to replace the headlight bulbs on a Ford Kuga? Follow these steps. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Once you locate the inspection cap of the headlight (at the rear of the headlight), remove it. Now, you will find the bulbs with metal clips; pull the bulb holder out of the headlight and extract the damaged bulb using a screwdriver. Fit the new bulb (ensuring it is the correct type and size) and insert the bulb holder back into the headlight housing. Finally, close the headlight with the inspection cap and reconnect the fluid top-up tube. Test the lights to ensure they are functioning correctly.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on Kuga
Replacing Front Headlight Bulb on Kuga
Ford Kuga (2012-2019 / C520, MK 2) Let's see how to remove the headlight bulbs from a Ford Kuga. Lift the front bonnet of the car and secure it. Remove the inspection cap from the head…
How to Remove the Front Headlight on a Ford Kuga
How to Remove the Front Headlight on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) This guide provides instructions to remove and replace the front headlight on a Ford Kuga in simple steps. First, open the bonnet of the vehicle and …
How to Change the Headlight Bulb on a Ford Kuga
How to Change the Headlight Bulb on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Replacing damaged front headlight bulbs on a Ford Kuga? Here’s how to do it. Open the access panel, pull the bonnet release lever; lift the bonnet an…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - How to replace the sidelight bulbs in Ford Kuga? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos